Ampeg BA-210SP User Manual download pdf (Page 7)

BA-210SP Bassamp Cube with Digital Effects

SYSTEM BLOCK DIAGRAM:

Preset A

Preset B

Preset C

Preset D

The BA-210SP allows you to save four DSP settings by means of the two button footswitch sup-

plied with the amplifier. Use the following steps to store and recall four DSP s e t t i n g s :

•Press the footswitch button until both LEDs are off – select an effect (bypass, “0”) – for reference,

this shall be Preset A

•Press the #1 button on the footswitch (the #1 LED illuminates and Preset A is stored) - select

another effect (chorus, “1”) and adjust to taste – for reference, this shall be Preset B

•Press the #2 button on the footswitch (the #2 LED illuminates and Preset B is stored) - select

another effect (octawah, “11”) and adjust to taste – for reference, this shall be Preset C

•Press the #1 button on the footswitch again (the #1 LED turns off and Preset B is stored) - select

another effect (SVT, “12”) and adjust to taste – for reference, this shall be Preset D

•Press the #2 button on the footswitch again (both LEDs are off and Preset D is stored) - Preset A

is automatically recalled – without changing the setting of the Effects control. Selection of the

e ffects is now controlled by the footswitch.

NOTE: The footswitch presets will be retained within the amplifier even after turning the amplifier

off, until the above steps are repeated using different effects settings.

PROGRAMMING THE FOOTSWITCH:

1 2 3 4 5 6 7 8

No comments

Ampeg BA-210SP User Manual Page 7